Download PDF by Tao Jiang, Jiann-Yang Hwang, Patrick Masset, Onuralp Yucel,: 3rd International Symposium on High-Temperature

By Tao Jiang, Jiann-Yang Hwang, Patrick Masset, Onuralp Yucel, Rafael Padilla, Guifeng Zhou

ISBN-10: 1118291417

ISBN-13: 9781118291412

ISBN-10: 1118364988

ISBN-13: 9781118364987

Proceedings of a symposium subsidized through the Pyrometallurgy Committee and the strength Committee of the Extraction and Processing department of TMS (The Minerals, Metals & fabrics Society)

Held through the TMS 2012 Annual assembly & Exhibition Orlando, Florida, USA
March 11-15, 2012


Show description

Read or Download 3rd International Symposium on High-Temperature Metallurgical Processing PDF

Similar extraction & processing books

Rheology Modifiers Handbook: Practical Use and Applilcation by David D. Braun, Meyer R. Rosen PDF

This can be the 1st single-volume guide with the data a researcher must pick out the easiest rheology modifiers for his/her venture. info on 20 forms of rheology modifiers synthetic by way of 26 businesses around the globe is defined. those variety from Acrylic Polymers to Xanthan Gum. This guide used to be written simply because, within the authors' event, the choice of a rheology modifier for particular purposes is an hard job.

Download e-book for iPad: Dielectric and Related Molecular Processes Volume 3 by Mansel Davies

Expert Periodical reviews offer systematic and distinctive overview insurance of growth within the significant components of chemical study. Written through specialists of their expert fields the sequence creates a special carrier for the energetic examine chemist, delivering general serious in-depth debts of growth specifically parts of chemistry.

Get Radiative Heat Transfer in Turbulent Combustion Systems: PDF

This creation stories why combustion and radiation are vital, in addition to the technical demanding situations posed through radiation. Emphasis is on interactions between turbulence, chemistry and radiation (turbulence-chemistry-radiation interactions – TCRI) in Reynolds-averaged and large-eddy simulations. next chapters conceal: chemically reacting turbulent flows; radiation homes, Reynolds shipping equation (RTE) answer equipment, and TCRI; radiation results in laminar flames; TCRI in turbulent flames; and high-pressure combustion structures.

Extra resources for 3rd International Symposium on High-Temperature Metallurgical Processing

Sample text

The furnace hood has regulation and control of the air inlet into the combustion zone in two different heights. The off gas temperature and composition was continuously monitored and analyzed during the experiment. In order to expand the knowledge on NOx-formation in silicon metal production, such information is vital, Introduction Because of the negative environmental impact, the attention towards all kinds of NOx emissions increases in Norway. The authorities' demand towards better surveillance and control of emissions increases as well.

Fig. 1. 86KJ/mol (2) The key technological parameters influencing conversion degree of magnetite are roasting temperature, CO concentration and solid/gas ratio. 045mm and magnetic field intensity of 1500 Oe, Secondly, preconcentration tests were conducted on roasted ore obtained from the condition of optimal roasting technological parameters, and then grinding fineness tests and magnetic field intensity tests were implemented on rough concentrate from 51 preconcentration tests. Finally, process flow tests were conducted on the basis of above conditioning tests.

The resulting NOx-values corresponding to the different air inlet to the furnace top, showed significantly differences between the different air inlet geometries. Furnace The experiment was carried out in a 400 kVA furnace operated at 160 kW. It is single phase furnace with adjustable current and voltage supply. The power supply can be operated with both AC and DC. Maximum DC current is 8000 A and maximum DC voltage is 300 V. Maximum AC current is 5700A and maximum AC voltage is 215 V. In this case AC was chosen.

Download PDF sample

3rd International Symposium on High-Temperature Metallurgical Processing by Tao Jiang, Jiann-Yang Hwang, Patrick Masset, Onuralp Yucel, Rafael Padilla, Guifeng Zhou

by Michael

Rated 4.63 of 5 – based on 15 votes